D-Link DPS-700 composant de commutation Alimentation électrique

1 206,22 €
TTC
589W, 80% Efficiency, 3.7kg, Black
The DPS-200, DPS-300, DPS-500/500DC, DPS-600, and DPS-700 redundant power supplies (RPS) are designed to conform to the wattage requirements of D-Link’s Ethernet and Gigabit switches. They are external RPS units enclosed in solid metal cases with sockets to AC or DC power sources on one end, and connect to a switch’s internal power supply on the other end. They provide a low-cost, simple solution to the problem of an inadvertent failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switch, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the power availability of the switching device. Redundant Power Backup Each D-Link RPS is equipped with an integrated detection circuit that continuously monitors the switch’s internal power supply. In the event of a power interruption, the redundant power supply is immediately triggered so that the LAN switch and its connected devices can continue providing service. This results in a more reliable network infrastructure and protects the network from going down due to failure of a single network device power supply. Easy and Flexible Deployment Deployment of a DPS series device does not require any change in the configuration of the LAN switch. With the exception of the DPS-500DC, each RPS is equipped with a universal internal power supply, and can be connected to any AC power source from 90 V AC to 264 V AC, 47 Hz to 63 Hz through a standard AC power cable. The DPS-500DC provides the same output power as the DPS-500, but connects to a DC power source instead of an AC power source. Rack Mounted Power Supplies: DPS-600/700 The DPS-600 and DPS-700 are 19-inch standard-size rack mount power supplies designed to improve flexibility in supporting PoE (Power over Ethernet) equipment. The DPS-700 also supports 1+1 power capabilities. When cascading the DPS-700 with a device’s internal power supply, the power system can provide an additional power budget to the device.
D-LINK
DPS-700

Fiche technique

Poids brut du casier d’expédition (interne)
18,2 kg
Longueur brute de la palette
120 cm
Tension d'entrée AC
90 - 264 V
Humidité relative de fonctionnement (H-H)
5 - 95 %
Casiers principaux (externes) par palette (air)
12 pièce(s)
Produits par palette (mer)
60 pièce(s)
Largeur brute de la palette
100 cm
Produit par casier d’expédition (interne)
3 pièce(s)
Casiers principaux (externes) par palette (mer)
20 pièce(s)
Fréquence d'entrée AC
50 - 60 Hz
Température d'opération
0 - 65 °C
Puissance totale
589 W
Profondeur
199 mm
Largeur
441 mm
Poids net du colis d'expédition
16,8 kg
Hauteur
44 mm
Hauteur du colis
132 mm
Poids
3,7 kg
Intensité (max.)
7,5 A
Température hors fonctionnement
-40 - 85 °C
Poids du paquet
5,6 kg
Couleur du produit
Noir
Largeur du carton d'expédition
42,4 cm
Longueur du carton d'expédition
57,7 cm
Hauteur du carton d'expédition
37,6 cm
Poids brut de palette (air)
238,4 kg
Quantité par palette (air)
36 pièce(s)
Hauteur de la palette (air)
126,3 cm
Poids brut de palette (mer)
384 kg
Temps moyen entre pannes
624961 h
Hauteur de la palette (mer)
2,02 m
Largeur du colis
344 mm
Profondeur du colis
559 mm
Type de produit
Alimentation électrique