APC SMT3000RMI2UC alimentation d'énergie non interruptible Interactivité de ligne 3 kVA 2700 W 9 sortie(s) CA

2 443,69 €
TTC
2.7 kW, 3 k VA, 50/60Hz, 200 V, 6ms, RJ-45 Serial, SmartSlot, USB, 320 Joules
Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide backup power. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. High online efficiency Reduces utility costs, generates less heat. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Network manageable Provides remote power management of the UPS over the network. Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Sequenced network shutdown and reboot Customize network shutdown and reboot sequence of connected servers and UPSs. Serial connectivity Provides management of the UPS via a serial port. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. SmartConnect Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services. StruxureWare Data Center Expert compatible Enables centralized management via StruxureWare Data Center Expert. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. USB connectivity Provides management of the UPS via a USB port (not available on all models). User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Wide input voltage range Designed for harsh electrical environments to save battery life.
APC
SMT3000RMI2UC

Fiche technique

Type d'écran
LCD
Humidité relative de fonctionnement (H-H)
0 - 95 %
Puissance de sortie
2700 W
Certificats de durabilité
RoHS
Capacité du rack
2U
Type d'interface série
RJ-45
tension de voltage à l'entrée (min)
151 V
Température d'opération
0 - 40 °C
Estimation de montée subite d'énergie
320 J
tension de voltage à l'entrée (max)
302 V
tension de voltage à la sortie (min)
220 V
Profondeur
683 mm
tension de voltage à la sortie (max)
240 V
Format
A mettre sur rack
Largeur
480 mm
Fréquence d'entrée
50,60 Hz
Hauteur
86 mm
Tension nominale à l'entrée
230 V
Hauteur du colis
254 mm
Poids
44,3 kg
Capacité de la batterie
547 VAh
Types de sortie AC
Coupleur C13, Coupleur C19
Température hors fonctionnement
-15 - 45 °C
Nombre de prises en sortie
9 sortie(s) CA
Interface série
Oui
Taux d'humidité relative (stockage)
0 - 95 %
Poids du paquet
51,7 kg
Prise mâle
Coupleur C20
Nombre de sorties IEC jumpers
3
Altitude de fonctionnement
0 - 3000 m
Altitude de non fonctionnement
0 - 15000 m
SmartSlot
Oui
Temps de rechargement de la batterie
3 h
Temps de secours type à demi de charge
11,5 min
Temps de secours type au chargement complet
3,2 min
Couleur du produit
Noir
Efficacité
98,9 %
Test de batterie automatique
Oui
Batterie échangeable à chaud
Oui
Durée de vie totale de la batterie (max)
5 année(s)
Topologie UPS
Interactivité de ligne
Logiciels fournis
Powershute Business Edition
Démarrage à froid
Oui
Délai de maintien (min)
4 ms
Délai de maintien (max)
8 ms
Régulateur de tension automatique (AVR)
Oui
Redémarrage automatique
Oui
Alarmes sonores
Oui
Forme d'onde
Sinus
Port USB
Oui
Certification
CE, EAC, EN 60950, EN,IEC 62040-1, EN,IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI
Câbles inclus
RS-232, Câble USB
Longueur de câble
2 m
Largeur du colis
600 mm
Profondeur du colis
980 mm
Voyants
Statut
Guide d'installation rapide
Oui
Technologie batterie
Sealed Lead Acid (VRLA)
Logiciel CD
Oui
Kit de montage en rack
Oui
Tension nominale de sortie
230 V
Niveau sonore
55 dB
capacité de la puissance de sortie
3 kVA