D-Link DIS-M100G-SW convertisseur de support réseau 4000 Mbit/s Multimode, Monomode Noir

282,91 €
TTC
10/100/1000 Mbps to SFP Industrial Media, 4 Gbps, IEEE 802.3, Auto-MDI/MDIX

D-Link’s Gigabit Industrial Unmanaged Media Converter turns an Ethernet connection into fiber, allowing for ultra-fast long distance connections. The DIS-M100G-SW media converter is housed in a highly resistant IP30-rated metal casing to protect the media converter from harsh environmental conditions. Meanwhile, the fanless design extends the life of the DIS-M100G-SW while also being able to operate in a wide temperature range from -40°C up to 70 °C. For increased flexibility, the DIS-M100G-SW can also be mounted on a DIN rail or conveniently mounted on a solid surface wall. In addition, the DIS-M100G-SW supports dual power input which allows for a redundant power supply configuration to make sure the media converter continues to operate in the event of a primary power supply failure. Extend Your Network Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Ethernet connection into a single-mode or multi-mode fiber connection that can go much further. Converters for distances of anywhere from 550 m to 80 km allow you to optimize your selection. No Wasted Space Its compact size fits anywhere and doesn’t require an entire rack. Measuring just 70 mm wide by 95 mm long by 26.1 mm in depth, with the total volume of one unit just 0.174 liters. This allows for convenient installation wherever it is needed, especially in limited space environments such as telecommunication cabinets or a distribution box. Plug and Play The media converters offered by D-Link include several industry-standard technologies that make them easy to operate, like 802.3u/x/ab. Auto-MDI/MDIX and Auto-Negotiation makes sure that your cable connection functions at the highest possible speed while remaining compatible. There’s no management software to configure – just simply connect the converter.
D-LINK
DIS-M100G-SW

Fiche technique

Humidité relative de fonctionnement (H-H)
5 - 95 %
Convertisseur d'interface d'entrée
100BASE-FX,100Base-TX,1000Base-T,1000Base-X
Connecteur de fibre optique
SFP
Structure du mode de fibre
Multimode, Monomode
Température d'opération
-40 - 70 °C
Système recto-verso
Complète, Demi
Profondeur
95 mm
Débit de transfert des données maximum
4000 Mbit,s
Ports Fibre Channel
1
Largeur
70 mm
LAN Ethernet : taux de transfert des données
10,100,1000 Mbit,s
Interne
Non
Hauteur
26,1 mm
Code (IP) Internationale Protection
IP30
Poids
190 g
Plug and Play
Oui
Nombre de port ethernet LAN (RJ-45)
1
Taux de transfert des paquets (100 Mbps)
2,976 pps
Température hors fonctionnement
-40 - 85 °C
Auto MDI/MDI-X
Oui
Taux d'humidité relative (stockage)
5 - 95 %
Standards réseau
IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
Couleur du produit
Noir
Type d'interface Ethernet
Gigabit Ethernet
Consommation électrique typique
3,6 W
Certification
CE, FCC
Tension de sortie
12 - 48 V
Voyants
Liaison, Réseau
Négociation automatique
Oui
Entrée DC
Oui
Technologie de connectivité
Avec fil